Skip to main content
adamescu
adamescu
New Member
March 4, 2019
Question

Fortimanager 6.0.4 script deployment

  • March 4, 2019
  • 1 reply
  • 4583 views

Hey guys.

 

I have lost an entire day figuring out what is wrong with my script deployment with  fortimanager 6.0.4 VM. I have about 60 devices registered to my fortimanager and everything seems to work fine. I need to update some object groups in all of these firewalls and i thought that the best solution is to use a CLI script from within my fortimanager. 

I created some basic script just to be sure that it runs  on the remote firewall , but when i use the same script ( exported and the imported into FMG) i am given a "Script NameofScript executed on Fortigate-Device failed". when I tap the details button it show at 2% "init state: start to check permission" 100% "no eligible script to be installed".

I am trying to execute the script with target "Remote Fortigate Directly (via CLI)"

 

PS: The fortigate devices are running  5.4.5 firmware.

 

Are there any bugs that I should know of ?

Have you guys encountered this problem with this  specific Fortimanager firmware?

 

I'm out of ideeas ! :)

1 reply

chall_FTNT
Staff
chall_FTNT
Staff
March 4, 2019

I would check that the FGFM connection is up between FortiManager & FortiGate.  Look at Connection Status under Device Name in Device Manager or "diag fgfm session-list".

Mario_Schafer
Mario_Schafer
New Member
May 27, 2019

Same Problem here.

fmg-connection is up. happens with any device...

Mario_Schafer
Mario_Schafer
New Member
May 28, 2019

I've opened a case with fortinet TAC.

As per advice of the engineer, maybe it's also your problem:

The Fortigate-Firmware needs to be the same as the ADOM-Version on the FMG.

If the ADOM-Version is different to the firmwareversion, the scripts will fail.

There is no workaround.

Terms & ConditionsAccessibility statement