Skip to main content
papa
New Member
January 15, 2020
Question

FortiGates and VRF with VPN

  • January 15, 2020
  • 8 replies
  • 15541 views

I am currently in the process of evaluating FortiGate firewall to be deployed at customer locations. The plan is to use IPSec tunnel between the FortiGate and a VPN gateway (Cisco or FortiGate) located in the data center. The plan is to share the same VPN gateway (pair to be precise) for multiple customers. On the Cisco platform I am used to using VRFs which allow the data traffic from customers to be separated. One of the options I will be considering is " VRF Aware IPSec" feature available on Cisco routers. Is something similar possible with the FortiGate firewalls? Should add that I don' t want to use VDOMs as the plan is to keep the tunnel end point IP address the same for all the FortiGate firewalls that are deployed. Thanks

    8 replies

    Toshi_Esumi
    SuperUser
    SuperUser
    January 15, 2020

    We use vdoms for that purpose. If don't, your customers share the same routing domain at the termination point of VPN, which defeats the purpose of having separate MPLS(VRF) network per customer on Cisco side.

    neonbit
    New Member
    January 15, 2020

    I believe VRF support is being added in FortiOS 6.4.

    Toshi_Esumi
    SuperUser
    SuperUser
    January 15, 2020

    I heard that rumor. But I didn't know it's in their road-map now. It would be more than a year out, I guess, even if that's true.

     

     

    papa
    papaAuthor
    New Member
    January 17, 2020

    The purpose is to Don't use vdoms for each VPN .We want to have the same public IP for all VPN and after separate the traffic with vrf for each customers . I dont now if it's possible to do .

    VRf support in vdom is added in fortiOS 6.2.3. i'm trying to build a comp for testing it .

    emnoc
    New Member
    January 17, 2020

    The only downside to this would be the 32 limits for total VRFs. So that would equal to 32 max clients if you can get it working.  Also this was discuss last month about VRF and VRF support

     

    https://forum.fortinet.com/tm.aspx?m=181441

    I played with it , but not with tunnels. I would not see any reason why it would not work, fwiw. So vdom would be cost prohibit in that you have hard set limits for the appliance and then license addon cost $$$$, VRF could be stroke upto 32 and then you deal with it as you by adding more fortigate and more IPs and go at it.

     

    The other issues which is more pressing ( imho ) , how much ipsec traffic and a performance degradation for up to 32x ipsec-tunnels.  ( i.e are you using a mid-range or entry level fortigate, what's the total IPSEC traffic in bps that is expected, etc.…..)

     

    Ken Felix

    dudarra
    New Member
    May 14, 2020

    Hi Guys, 

     

    we have some old Cisco Nexus 5K and it would be funny to replace them with the FortiCluster

     

    But is out there any kind of documentation for the VRF use? My aim would be to have the Firewall as a CustomerEdge device!

     

    Cherrio Raffa

    Thought Leadership Security Summit. Outpace New Threats with AI - enhanced defense. Tuesday, Septmeber 15, 8:30 AM - 2:30 PM PT. The Golf Club at Newcastle, WA.
    Fortinet Flag the Hack. Wednesday, August 26, 9:00 AM - 5:00 PM ET, COSM, Atlanta, GA.