Skip to main content
itmaint
itmaint
New Member
October 19, 2022
Question

Fortigate80F FAP223E

  • October 19, 2022
  • 3 replies
  • 2651 views

Hello,

 

I am needing help because the Fortigate 80F v6.4.6 build6083 does not detect  two FAP-223E.

 

I  had already setup another installation time ago with the same Firewall ,firmware and  access point without any kind of issue.

 Thanks in advance

 

 

 

3 replies

sagha
Staff
sagha
Staff
October 20, 2022

Hi itmaint, 

 

Try resetting the FAP-223E devices first and see if it works after that. This should be done using the reset option available physically on the device. 

 

Thank you. 

Shahan Agha

itmaint
itmaintAuthor
New Member
October 20, 2022

Thanks Sagha,

 

I had already try the hard reset but it does not works.

itmaint
itmaintAuthor
New Member
October 20, 2022

The strange is that the dhcp server (Fortigate 80F) assign the IP to the 2 FAPs , but in "Managed FortiAPs" there is nothing. 

 

sagha
Staff
sagha
Staff
October 20, 2022

Hi itmaint, 

 

Do you have following enabled under the interface? 

Under Administrative Access, select Security Fabric Connection.

 

You can also do a sniffer on FGT to check if any capwap traffic is making it to the FGT. 

 

diag sniffer packet any 'port 5246' 4 0 a

 

Thank you.

Shahan

itmaint
itmaintAuthor
New Member
October 20, 2022

Hi,

The Security Fabric Connecion in enabled, while the diag sniffer packet any 'port 5246' 4 0 a  return

: FortiGate-80F # diag sniffer packet any 'port 5246' 4 0 a
interfaces=[any]
filters=[port 5246]
^C
0 packets received by filter
0 packets dropped by kern

Terms & ConditionsAccessibility statement