Skip to main content
jay4jay
jay4jay
New Member
March 10, 2021
Question

Fortigate VLAN setup on Fortigate 100F v6.2.3

  • March 10, 2021
  • 1 reply
  • 3183 views

Hi Guys i am a completely noob with firewall this is my first ever firewall.

 

i am trying to setup VLAN on the firewall model 100f connected to a managed TP LINK switch TL-SG1016DE which supports VLAN 802.1q.

 

i have setup vlan10 id on firewall with interface port 3 no ip set on the interface but on the vlan i setup ip 192.168.110.1 /24 with dhcp enabled.

 

i have setup vlan 802.1q on switch port 1 to 3 untagged and port 4 tagged with vlan10 id.

 

connected ethernet cable from port 3 on FireWall to port 4 on tp link switch.

 

connected port 1 on tp link switch to ethernet port on pc and no ip address is pick up.

 

if i setup the ip address on the interface itself like port 3 of the firewall manually and enable dhcp connect to switch the pc will receive ip address.

    1 reply

    sw2090
    SuperUser
    sw2090
    SuperUser
    March 10, 2021

    Probably the easiest way to debug that would be in step1 to start a packet sniffer that listens on port 3 of your FGT and look if you see any DHCP related packages. There should come some DHCPREQUEST packet from your client. 

    Maybe filter the sniffer by the mac address of your client (there is no ip yet).

    Terms & ConditionsAccessibility statement