Skip to main content
thatsdanish
New Member
January 30, 2026
Solved

FortiGate upgrade to 7.4.11

  • January 30, 2026
  • 2 replies
  • 11090 views

Due to a recent vulnerabiliy reported on 7.4.9 i need to upgrade to 7.4.11 but in the fortigate GUI unders system firmwares i can only see upgrae to 7.4.10 available.

 

However on the support portal 7.4.11 image is available for download ? 

 

Does this mean 7.4.11 not recommended for upgrade ? why it is not showing in upgrade path 

Best answer by rp1996

The firmware release buffer for version 7.4.11 is 3rd of February as per the internal release outlook, however the firmware as such for certain models are already released and can be found in the Fortinet support portal aka FortiCloud, and can be downloaded from firmware download section under support found in the navigation menu. 

 

You can perform the manual upgrade method, by following the steps contained in the following article. 

https://community.fortinet.com/t5/FortiGate/Technical-Tip-Manual-firmware-upgrade-by-referring-to-an-upgrade/ta-p/193305

 

 

Please ensure to check the upgrade path available at: https://docs.fortinet.com/upgrade-tool/fortigate  

 

And go through the release notes prior upgrade. 

2 replies

rp1996
Staff
rp1996Answer
Staff
January 30, 2026

The firmware release buffer for version 7.4.11 is 3rd of February as per the internal release outlook, however the firmware as such for certain models are already released and can be found in the Fortinet support portal aka FortiCloud, and can be downloaded from firmware download section under support found in the navigation menu. 

 

You can perform the manual upgrade method, by following the steps contained in the following article. 

https://community.fortinet.com/t5/FortiGate/Technical-Tip-Manual-firmware-upgrade-by-referring-to-an-upgrade/ta-p/193305

 

 

Please ensure to check the upgrade path available at: https://docs.fortinet.com/upgrade-tool/fortigate  

 

And go through the release notes prior upgrade. 

ramirezc
Staff
Staff
April 1, 2026

Hello all, 

 

Please note that this is a known issue that is being resolved on 7.4.10.

 

refer to the KB below:

 

https://community.fortinet.com/t5/FortiGate/Troubleshooting-Tip-No-valid-upgrade-path-error-when-upgrading/ta-p/422427