Skip to main content
NAS
New Member
Jun 25, 2024 1:16 PM UTC
Solved

Fortigate system email does not accept secondary WAN IP as source IP

We have a WAN interface on which 6 public IPs are available.  On the WAN interface the value x.x.2.226/24 is specified for IP/Netmask. I wanted to enter the value x.x.31.227 for the source-ip of the email-server in the CLI, but I get an error message ..:

 

config system email-server

set source-ip x.x.2.227

x.x.2.227 does not match any interface ip in vdom root.

node_check_object fail! for source-ip x.x.2.227

 

value parse error before 'x.x.2.227'

Command fail. Return code -8 

 

I need the dedicated WAN address x.x.2.227 for the forti mail-server because I have to use it for validation in an ExchangeOnline Connector. Does anyone here have an idea how I can do this or an alternative solution?

Any workaround is welcomed.

 

Thanks in advance

NAS
NASAnswer
New Member
Jun 25, 2024 9:37 PM UTC

The problem has been solved, apparently I had a transposed number when entering the secondary IP address in the WAN interface. After the IP address (x.x.2.227) was entered correctly there, the source IP in the email server could be changed without errors.

1 reply

NAS
NASAuthorAnswer
New Member
Jun 25, 2024 9:37 PM UTC

The problem has been solved, apparently I had a transposed number when entering the secondary IP address in the WAN interface. After the IP address (x.x.2.227) was entered correctly there, the source IP in the email server could be changed without errors.

Thought Leadership. Security Summit. Thursday, November 12th, PGA National Resort, Palm Beach Gardens, FL.
Security Operations Summit: Modernize SecOps. Operate AI-Native.AMER: November 4 | 9:00 AM PST. India and SAARC: November 5 | 10:00 AM IST. EMEA: November 5 | 10:30 AM CET. APAC: November 5 | 11:00 AM SGT