Skip to main content
K00Ster
K00Ster
New Member
January 30, 2017
Question

Fortigate S2S IPSEC VPN branch Traffic Goes to internet

  • January 30, 2017
  • 1 reply
  • 4618 views

Hi Everyone

 

I have two Fortigates (200D & 90D) configured with a site to site VPN, from my Headquarters I can get into the branch office and open up Network resources and RDP sessions without a problem, however from my branch I can not get into my HQ, the traffic keeps on going public and not trough the IP-SEC tunnel. 

 

I have 2 other Branches in this configuration and they work perfectly fine also a 200D to a 90D

 

Any advice or something I might be missing

    1 reply

    MikePruett
    MikePruett
    New Member
    January 30, 2017

    Do you have a sanitized version of your config you can share?

     

    Sounds like an erroneous route or something causing issue.

    rwpatterson
    rwpatterson
    New Member
    January 30, 2017

    At the remote site, do you have a static route back down the tunnel with a lower distance than the default? That is needed so traffic goes the right way. Usually that's the missing link.

    Terms & ConditionsAccessibility statement