Skip to main content
DanieleS99
DanieleS99
Explorer
September 5, 2022
Solved

Fortigate HA sync

  • September 5, 2022
  • 2 replies
  • 3812 views

Hi,

which are the parts of the configuration that the fortigate does not synchronize in the HA Active-Passive?

for example, are the ip of the interfaces synchronized?

 

Thanks

Best answer by kgeorge

Hello Daniele,

 

Greetings!

 

Please refer this article below to understand what and what does not sync between devices configured in HA Cluster, 

 

https://community.fortinet.com/t5/FortiGate/Technical-Tip-HA-FortiGate-configurations-that-will-sync-and/ta-p/216710

 

Have a nice day.

 

Cheers.

2 replies

kgeorge
Staff
kgeorgeAnswer
Staff
September 5, 2022

Hello Daniele,

 

Greetings!

 

Please refer this article below to understand what and what does not sync between devices configured in HA Cluster, 

 

https://community.fortinet.com/t5/FortiGate/Technical-Tip-HA-FortiGate-configurations-that-will-sync-and/ta-p/216710

 

Have a nice day.

 

Cheers.

alif
Staff
alif
Staff
September 5, 2022

Hello @DanieleS99 

 

The following settings are not synchronized between cluster units:

- The FortiGate host name
- GUI Dashboard widgets
- HA override
- HA device priority
- The virtual cluster priority
- The HA priority setting for a ping server (or dead gateway detection) configuration
- The system interface settings of the HA reserved management interface
- The HA default route for the reserved management interface, set using the ha-mgmt-interface-gateway option of the config system ha command

 

Please refer to the below link for details.
https://docs.fortinet.com/document/fortigate/7.0.5/administration-guide/62403/fgcp

Terms & ConditionsAccessibility statement