Skip to main content
Kriz
Kriz
New Member
September 18, 2025
Question

FortiGate 60F: Upgrade from FortiOS 7.0.13 to 7.4.8 via GUI?

  • September 18, 2025
  • 1 reply
  • 3009 views

Hello Fortinet Community,

I am planning to upgrade my FortiGate 60F, which is currently running FortiOS v7.0.13, to the newest v7.4.8 (Mature) version. My firewall is not managed by FortiManager, and I intend to perform the upgrade locally through the device's web GUI during off-work hours.

When I go to the System > Firmware & Registration page, the FortiGate shows me a direct upgrade path to v7.0.17, then to 7.2.X, and finally to 7.4.8. It also has a "Follow upgrade path" option.

I have a few questions to confirm the process:

  1. Can I rely on the GUI to safely perform all the intermediate steps in the upgrade path?

     

    Forti_OS_upgrade.png

  2. Are there any known issues with this specific upgrade path from 7.0.13 to 7.4.8 that I should be aware of?

  3. Will the firmware upgrade automatically back up my configuration, and should I also download a local backup before starting?

  4. Since my VPN is on a separate WAN interface, will the firmware upgrade maintain the VPN configuration, and will it automatically reconnect after the reboot?

Any advice or experiences with this upgrade path would be greatly appreciated.

Thank you!
#FortigateFirmware

1 reply

kaman
Staff
kaman
Staff
September 18, 2025

Hi Kriz,

You have to download the firmware versions as below:

7.0.13 M > 7.2.8 M > 7.2.10 M > 7.4.8 M

https://docs.fortinet.com/upgrade-tool/fortigate ----- Upgrade Path Tool Table

Q1: Can I rely on the GUI to safely perform all the intermediate steps in the upgrade path?
> Yes, you can manually upgrade the firmware version
https://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-manually-perform-a-firmware-upgrade-from/ta-p/193805


Q2: Are there any known issues with this specific upgrade path from 7.0.13 to 7.4.8 that I should be aware of?
> You can refer to the document below for the Known issues of v7.4.8
https://docs.fortinet.com/document/fortigate/7.4.8/fortios-release-notes/236526/known-issues


Q3: Will the firmware upgrade automatically back up my configuration, and should I also download a local backup before starting?
> Yes, it will prompt the option 'Confirm and backup config'


Q4: Since my VPN is on a separate WAN interface, will the firmware upgrade maintain the VPN configuration, and will it automatically reconnect after the reboot?
Yes, the VPN configuration will remain the same and will not be removed.


If you have found a solution, please like and accept it to make it easily accessible to others.


Regards,
Aman

Terms & ConditionsAccessibility statement