Fortigate 60F - how to connect our internal network

Hi @JoeyTwinkleToes 

Thank you for posting your query.

FGT does not give IP to the L2 switch.

Please follow the below link for the admin guide

https://docs.fortinet.com/document/fortigate/7.4.0/administration-guide/954635/getting-started

https://docs.fortinet.com/document/fortigate/7.4.0/administration-guide/100999/hardware-switch

Regards
Priyanka

- Have you found a solution? Then give your helper a "Kudos" and mark the solution

A basic but fundamental question: Are you trying to make the new switch as an L3 switch and let it be the GW to all devices behind it? Or you want to make the switch as an L2 switch but want it to grab a management IP from the FGT?

Toshi

Hi,

If you want to act the Switch act a L3 device, then Fortigate can be configured to give an IP address to the Switch. Incase it's an L2 Switch, Fortigate will not give any IP address to the switch.

BR,

Manosh

Hello 

So assigning IP depends in configuration. Need to check if any DHCP on fortigate on that interface.
L2 switch will not send and DHCP request you need to confirm the configuration first.

Thanks & Regards
Mayank Sharma