Skip to main content
o_previti
o_previti
New Member
January 12, 2021
Question

fortigate 60d access vlan port

  • January 12, 2021
  • 1 reply
  • 16771 views

i have un fortigate 60d , i removed the cisco switch to manage everything from the firewall. on the cisco switch I had ports in access mode, is it possible to have the same configuration on the firewall ports?

    1 reply

    isamt
    isamt
    New Member
    January 12, 2021

    Fortigates operate in switch or interface mode

    In switch mode you have a single virtual interface containing all user ports so effectively acts as in access switch mode.

     

    o_previti
    o_previtiAuthor
    New Member
    January 12, 2021

    i have configurated hardware switch and free internal 

     

    [image][/image]

     

    but i can't put internals in access mode on a specific vlan like normal cisco switches. example I have a device that I cannot set the vlan but I have wired on my fortigate and not being on the vlan specification it is not reached by other devices 

    o_previti
    o_previtiAuthor
    New Member
    January 12, 2021

    I wonder then why the hardware switch function. I'm trying

     

    edit "internal5" set vdom "root" set ip 172.25.40.254 255.255.255.0 set allowaccess ping set alias "QNAP" set device-identification enable set role lan set type physical set snmp-index 20 set vlanid 40 next

     

    but when i try the command set vlanid 40 show error 

     

    [image][/image]

     

     

    Terms & ConditionsAccessibility statement