Skip to main content
ghorchem
ghorchem
New Member
July 7, 2012
Question

Fortigate 40c vlan configure using the CLI

  • July 7, 2012
  • 2 replies
  • 8615 views
The lastest firmware no longer supports configureing vlans from the web gui how do you do this using the CLI.

    2 replies

    abelio
    SuperUser
    abelio
    SuperUser
    July 7, 2012
    hello, indeed, with 40c you can do that with cli, usual way: 
      config system interface    edit <name>       set type vlan       set vlanid <id>       set vdom <vdomname>       set ip ...        ...     next  end
    http://docs.fortinet.com/fgt/handbook/40mr3/fortigate-cli-40-mr3.pdf regards
    bbache99
    bbache99
    New Member
    July 9, 2012
    If you click on the create new button on the interfaces page there is an option to set VLAN and bind it to an interface? - do you not have that? Running MR3 patch 8
    Terms & ConditionsAccessibility statement