New Member

Solved

Fortigate 30D Configuration

Hi Guys,

I need to configure a Fortigate 30D with the configuration steps in the link below (80CM):

I don't need the IPTV feature, just internet. Are the steps straight forward as the link? or do I need CLI to program.

Currently the 30D is not with me, thus I cant test.

Thanks for your help.

Ken

Best answer by gschmitt

AH ok!

In that case the wizard won't quite suffice I fear, but no worries.

Go to System > Network > Interfaces and select Create New

Enter a Name

Type: VLAN

Interface: the connected physical interface

VLAN ID: 500

Configure the rest as needed

This will appear as a normal interface from now on, simply create an Internal to Name policy allowing traffic

New Member

If you just want the device to grant web access I'd recommend you use the wizard. It will guide you through the most basic steps

New Member

Thanks for the input.

The most important is the WAN (ISP). It needs VLAN500 for PPPoE .

I presume this is not an issue via WEB GUI :)

Thanks

Ken

New Member

AH ok!

In that case the wizard won't quite suffice I fear, but no worries.

Go to System > Network > Interfaces and select Create New

Enter a Name

Type: VLAN

Interface: the connected physical interface

VLAN ID: 500

Configure the rest as needed

This will appear as a normal interface from now on, simply create an Internal to Name policy allowing traffic

Sign up