FortiEMS 7.0.10: Clients dont upgrade

Forum|Forum|2 years ago
November 14, 2023
2 replies
3298 views

Hello!

I have updated FortiEMS under Windows Server from 7.0.9 to 7.0.10. But now the upgrade of the Forticlient to the 7.0.10 version does not start on the clients, in the EMS console all remain on "Endpoint Notified". The client - server connection is displayed as green. This worked perfectly with previous EMS versions.

What can I do to ensure that the clients are also updated?

greetings from switzerland!

martin

peisenberg

Staff

Hi Martin

Its not easy to say exactly where is the issue but you might try this KB and see if that help. If not I suggest to create TAC ticket to troubleshoot your issue with TAC engineer

https://community.fortinet.com/t5/FortiClient/Troubleshooting-Tip-FortiClient-Deployment-Error-150-for/ta-p/260271

Pavol

Sheikh

Staff

Hello @mhe

What network ports are allowed between endpoints and EMS ? Please check the Firewall and ensure that following ports are open "TCP 135, 445, and 10443 ports between EMS Server"

regards,

Sheikh

mheAuthor

Explorer II

I have checked these ports again - all are open. Remote registry and task scheduler are running and the Windows firewall of the client allows the connection from the EMS server.

The upgrade of the clients also worked perfectly up to version 7.0.10.

Sheikh

Staff

Hi, logs from the client as well as from EMS server will give some more insight, but I would also suggest to open a TAC support case for more troubleshooting.

regards,

Sheikh

Sign up

Login with SSO

Login to the community

Login with SSO

Scanning file for viruses.

This file cannot be downloaded