Skip to main content
sys_pf
sys_pf
Explorer
October 17, 2022
Question

ForticlientToos

  • October 17, 2022
  • 6 replies
  • 6261 views

Hi everyone,I´m use forticlient 7.0.7 and it´s work fine. My problem at when i use Fortisslvpnclient from SSL VPN command line it's connect to vpn but the network adapter not have ip correctly. The dhcp server is active. If i connect that Fortisslvpn it´s work correctly.

 

Capture.PNG

 

 

Has anyone had this problem?

 

 
 

 

6 replies

Anthony_E
Staff
Anthony_E
Staff
October 20, 2022

Hello sys_pf,

 

Thank you for using the Community Forum.

I will seek to get you an answer or help. We will reply to this thread with an update as soon as possible.

 

Regards,

Best Regards
Martin_H
Martin_H
New Member
October 24, 2022

Hi,

YES, I have a same problem like you...

I try lot of things, with the same result... btw route table is not changed too...

 

SW ver.: FortiClientTools_7.0.7.0345

 

BR Martin

 

btan
Staff & Editor
btan
Staff & Editor
October 25, 2022

Hi sys_pf,

 

I did a quick test and issue is able to reproduce.

But as long as a proper SSLVPN login via FCT full version GUI has been made, it will no longer be able to reproduce. This is an interesting behavior.


To escalate this, kindly raise a TAC ticket via FortiCare, as fortisslvpnclient.exe is supposed to be used by Fortinet customer with a valid support license.

    Zotes
    Zotes
    Visitor III
    October 25, 2022

    Hi,

    I have the same problem. I have tested that if you assign the static IP manually on the Fortinet SSL VPN network card it works and is able to generate traffic.

    It only happens on SSL tunnels, IPSec tunnels work without problems. I have tried several versions of Forticlient and now it happens with all of them.

    sys_pf
    sys_pfAuthor
    Explorer
    October 25, 2022

    Hi,

    I have tried with version 7.0.0 and it works, but with 7.0.2 and onwards not work anymore.

     

      Zotes
      Zotes
      Visitor III
      October 25, 2022

      Good,

      I've tried 7.0.0 and it doesn't assign me any IP either.

      The network card stays at 169.254.X.X.

      Hopefully it will be solved with 7.0.8.

      What operating system do you have? All my problems have been when upgrading to W11.

      ocasaenva
      ocasaenva
      New Member
      March 11, 2023

      Small business consultant here. 18 gates in the field. Would like to deploy forticlient to ~150 computers via GPO and an outputted .MSI ..

       

      Don't have a dedicated sales rep, have no intentions to license/plan FortiClient on workstations at this time.

       

      Anyone got any bright ideas about how to go about this without access to the developer network?

      sys_pf
      sys_pfAuthor
      Explorer
      June 13, 2023

      Hi everyone,

      It´s problems is resolved with version 7.2.1. Its work for me.Capture.PNG

       

       

        Terms & ConditionsAccessibility statement