Forticlient 7.2.3 prompts for admin credentials for certificate change on MacOS 14

Question

I'm deploying FortiClient 7.2.3 using Jamf to macOS 14 devices. The issue we are having is that even though we have a mobileconfig profile deploying the necessary certificates and PPPC settings to the devices, when the FortiClient connects to our EMS server for the first time, it prompts for admin credentials for a certificate change. But regardless if you enter the password or cancel the prompt no change is made to the certificates in keychain. After the initial connection to EMS this prompt does not re-appear. Has anyone been able to get rid of this prompt? This wasn't an issue when we were using version 6.4.8 of FortiClient.

Screenshot 2024-03-28 at 4.04.35 PM.png Screenshot 2024-03-28 at 4.05.23 PM.png

ozkanaltas · Accepted Answer

Hello @johntsvi ,

This warning is related to client certificates. FortiClientEMS gives client certificates to every client.

As you said, this prompt just shows one time while initial connection to EMS. After this, the client certificate is installed on the client's computer.

Generally, these certificate names start with "FCTEMS". This name comes from the FortiClient serial number. You can see this, FortiClient or FortiClientEMS console. Can you check the certificate store with this name again?

Btw, if you don't use ZTNA, you can close the ZTNA feature on your user profile. After that, this certificate prompt will not show. Because this client certificate is related to the ZTNA feature.

jintrah_FTNT · Answer

Hi,

This seems similar to an engineering report mentioned here Known issues | FortiClient 7.2.4 | Fortinet Document Library under id 905880

ZTNA certificate prompt displays when deploying FortiClient (macOS) with Jamf Pro configuration profiles.

Workaround: enable ZTNA in both on-fabric and off-fabric profile if using both.

Best regards,

Jin

Sign up

Login with SSO

Login to the community

Login with SSO