FortiAP421E appears disconnected

Hello to all,

I want to build an infrastructure at home, for this I have a Fortigate 60D in version 6.0.9 and a FortiAP421E in version 6.0.6.

The problem is that I can see the terminal on my Fortigate but once I authorize it, it appears as "disconnected"

The terminal is connected to my L3 internal 3 port. It gets a DHCP address.

I checked the compatibility matrix, everything is normally good.

Does anyone have an idea?

Thanks for your help =)

LeDAuthor

New Member

Too many DTLS setup failures 5. Restart wtp daemon ..

I get this message quite often... I don't understand, I set the dtls mode to clear on both sides...

New Member

Enable security fabric on the interface connected to AP , if it takes dhcp and still disconnected try to upgrade both firmware

Sign up