Fortiap 441k radio 3 not working (has full power)

Forum|Forum|1 year ago
December 12, 2024
6 replies
2568 views

I have a fortigate 60f connected to a fortiswitch 108F-FPOE (full power switch), then connected to a fortiap 231f and a 441k.

I have created an ssid that only supports wifi6e using 6ghz, is enabled, has wpa3 sae for security, shows that it is enabled in the dashboard.

however it is not broadcasting... one small issues I noticed I set the channels to only allow uni5 and uni6 however it still says it is using channel 1.

any support would be great thanks.

FortiAP

Best answer by ebilcari

You are mentioning that you have checked the allocated power but according to this article (802.3bt -60/90W) and the datasheet of the switch (802.3af/at), this switch is not capable to offer full power for this AP. Can you share the output of cw_diag power ?

ebilcariAnswer

Staff

You are mentioning that you have checked the allocated power but according to this article (802.3bt -60/90W) and the datasheet of the switch (802.3af/at), this switch is not capable to offer full power for this AP. Can you share the output of cw_diag power ?

Emirjon

jcrawfordAuthor

New Member

I have the 108F-FPOE not the 108F-POE. here is the output

FortiAP-441K # cw_diag power

Power Detection Data: dc=0 ps1=1 af1=0 at1=1 psv1=0 bt1=0 ps2=0 af2=0 at2=0 psv2=0 bt2=0
Budget lldp 0,0 poe 25,0 (dc=99 af=13 at=25 psv=60 bt=50 full=43.0 low=24.9)

Current Power Mode: high (3) Oper Power Mode: high (3)

Radio 1: MaxTxpower 17 TxChainMask 0x03 RxChainMask 0x03
Radio 2: MaxTxpower 17 TxChainMask 0x03 RxChainMask 0x03
Radio 3: MaxTxpower 17 TxChainMask 0x03 RxChainMask 0x03
Radio 4: MaxTxpower 17 TxChainMask 0x05 RxChainMask 0x05
USB: disabled

full:usb,all radios,txpower full,chain 4; high:2G/5G radio,txpower 17dBm,chain 2; low:disable all radios

ebilcari

Staff

Model 110G-FPOE will support 802.3bt, I think this model supports only 802.3at as also seen in the line: Budget lldp 0,0 poe 25,0 (dc=99 af=13 at=25

Emirjon

Sign up

Login with SSO

Login to the community

Login with SSO