Fortiap 433G

Hello,

Thank you for using the Community Forum. I will seek to get you an answer or help. We will reply to this thread with an update as soon as possible.

Thanks,

Hello,

We are still looking for an answer to your question.

We will come back to you ASAP.

Hello again mcm2590,

I found this solution. Can you tell us if it helps, please?

In FortiAP v7.2.3 and from 7.4.0, it is possible to configure third-party antennas by selecting a "Custom" option for certain FortiAP models, including the FAP-433G. Here’s how you can configure third-party antennas:

1. Access FortiAP Configuration:

   • Log in to your FortiGate interface.
   • Navigate to the FortiAP profile settings.
     
     

2. Select Custom Antenna: In the antenna configuration section, choose the "Custom" option for the antenna type.
   
   

3. Input Antenna Specifications: Enter the specific gain and other relevant parameters of the third-party antennas you are using (e.g., gain in dBi).
   
   

4. Adjust TX Power: Ensure that the target TX power is set appropriately, considering the gain of the third-party antennas to comply with regulatory EIRP limits.
   
   

Regarding compatibility, while the FortiAP-433G supports custom antenna configurations, you should verify the physical and electrical compatibility of the Ventev antennas with the FortiAP-433G. This includes checking connector types and ensuring that the antennas meet the operational frequency range of the FortiAP-433G.

If you have further questions or need specific guidance, consulting with Fortinet support or a network specialist familiar with your setup would be beneficial.