FortiAP 221C Firmware Upgrade from V5.2 Build 475 to v5.2.5

Forum|Forum|10 years ago
February 29, 2016
10 replies
23722 views

Hi,

I would like to know Build 475 refer to which firmware patch or build.I tried upgrading one of the 221C to FAP_221C-v5-build0254 but AP is not responding .How to get the console ? there is no option .How to perform Hard Reset ?.

There is only orange light is showing .Is there a way to connect and Check the issue.

regds

Ashik

SMFTNT

Staff

Hello Ashik, In response to your questions please see the outlined below. 1. Build0475 would be a manufacturing build. 2. There is no console available on the FAP 221C model. One would have to run execute telnet from the FortiController. 3. A hard reset can be performed by pressing & holding the reset button aprrx 10 sec, located on the face-center above the Fortinet logo. 4. Once the hard reset has been completed, the unit returns to DHCP by default. From the FortiController > Managed AP's, one would see the 221C listed w/Ip Address and State w/a question mark (?). Hope this helps,

Thank you,

Shawn

Ashik_SheikAuthor

New Member

Hi Shawn,

I have tried above steps but couldn't succeed .The Ethernet LED shows orange and its not showing in the wireless controller as well .Let me know is there anything else i could do get a access to AP .

Thanks

Ashik

Sign up

Login with SSO

Login to the community

Login with SSO