Skip to main content
Paulpablito77
Paulpablito77
New Member
June 14, 2022
Question

FortiAnalyzer - High CPU

  • June 14, 2022
  • 3 replies
  • 3541 views

Hi,

I upgraded my FortiAnalyzer to v7.0.3-build0254 220202 (GA), following the upgrade path. I see that the CPU have very high value, from 94 to 98%. I run this command:
exe top

The first line of the output:

PID   USER  PR NI   VIRT     RES     %CPU      %MEM TIME+ S        COMMAND
620   root   20 0   504.0m   37.7m    158.3     1.0 497:52.29 S    /bin/fileparsed

 

and another command:

=== resource use information ===
Program uses most memory: [postgres: checkpointer ], pid 808, size 451m
Program uses most cpu: [/bin/fileparsed], pid 620, percent 186%

 

What is /bin/fileparsed ?

 

Tnx-

 
 

 

 

3 replies

A
Anonymous_User
New Contributor III
June 17, 2022

Hello @Paulpablito77 ,

 

Thank you for using the Community Forum. I will seek to get you an answer or help. We will reply to this thread with an update as soon as possible. 

 

Thanks, 

markwarner
Staff
markwarner
Staff
June 20, 2022

Hello Paulpablito77,

If you want a detailed analysis of your system, it would be best to open a support case including the output of this CLI command:
execute tac report

 

It runs a long list of debug commands that will give the TAC a full overview of your system spec & utilization.


I can't tell if you have a VM or hardware but if it is a VM you should check that it meets minimum spec stated in the virtualization guides:
https://docs.fortinet.com/vm/product/fortianalyzer

Mark.

Paulpablito77
Paulpablito77Author
New Member
June 20, 2022

Thank you. It's a Fortianalyzer 200F, it's not a VM. I will try to open a TAC request, I've never done this before and I don't even know if my service contract provides for it.


Paolo.

 
 

 

 

Terms & ConditionsAccessibility statement