FortiADC 220 stopped any sessions from working

Forum|Forum|2 years ago
February 16, 2024
3 replies
1313 views

We have 2 FortiADC 220 in our network . We noticed that no clients could connect to our Application server. When we failed over from master to slave everything started to work. We noticed master was not allowing any new sessions. Any help in this matter would be great. Any suggestions please?

FortiADC

Best answer by AEK

Which firmware version are you using?

Think about running "diag debug report" command from CLI when the issue occurs and before failing over to the second node. This may contain useful information regarding the issue.

reggie6

New Member

Each vendor has bugs unfortunately I find that in my experience with Cisco, Fortinet and Palo Alto al have their issues and for me it’s no Cisco anymore… 6.4.10 is marked as a M or Mature release I would look at this for your stability etc…7.0.6 is a F or Feature release https://mobdro.bio/

AEKAnswer

SuperUser

Which firmware version are you using?

Think about running "diag debug report" command from CLI when the issue occurs and before failing over to the second node. This may contain useful information regarding the issue.

AEK