Skip to main content
Ferdo
Ferdo
New Member
June 24, 2013
Question

Forti 600C : How to set ssl VPN subnet default gateway

  • June 24, 2013
  • 1 reply
  • 18953 views
Hi, Can anyone tell me how to set the default gateway of my SSL VPN subnet. Regards

    1 reply

    rwpatterson
    rwpatterson
    New Member
    June 24, 2013
    I would assume you are using tunnel mode. The FGT will do that automatically. Just make sure that the interface IP address falls within the SSL VPN IP range.
    Ferdo
    FerdoAuthor
    New Member
    June 25, 2013
    Hi rwpatterson, Thank you for answering me. Of course the IP address is in the address range of SSL VPN. The client connected via VPN can not access resources located in DMZs. For the client accesses to resources in the DMZ, I must first create a route on the PC to the DMZ. Can you tell me how to not have to create route every time a client connected via VPN to access the DMZ ? Thank you very much Regards Ferdo
    rwpatterson
    rwpatterson
    New Member
    June 25, 2013
    Are you using the Forticlient product or the SSL VPN client product?
    Terms & ConditionsAccessibility statement