Skip to main content
ispcolohost
ispcolohost
New Member
February 10, 2023
Question

Force FortiExtender FEX-511F to LTE mode?

  • February 10, 2023
  • 4 replies
  • 4082 views

Curious if anyone knows of a directive which can be used to force an FEX-511F FortiExtender into an LTE-only mode instead of allowing 5G?  I have one of these that I'm trying to make use of with T-Mobile.  I'm in an area where there's plenty of strong LTE coverage, but unfortunately I'm on the very edge of 5G with just enough to generate an RSSI that tends to move around from -98 to -103 dBi, which is unusable, but just enough signal to make the extender want to stay connected to 5G instead of trying LTE.  I'd like to force it to not use 5G until they put a closer tower in but can't find a way to do that.

4 replies

Anthony_E
Staff
Anthony_E
Staff
February 13, 2023

Hello ,


Thank you for using the Community Forum. I will seek to get you an answer or help. We will reply to this thread with an update as soon as possible.


Thanks,

Best Regards
Anthony_E
Staff
Anthony_E
Staff
February 15, 2023

Hello,

 

We are still looking for someone to help you.

We will come back to you ASAP.


Regards,

Best Regards
gfleming
Staff
gfleming
Staff
February 15, 2023

I had a brief look and can't see anything. Is there any way your carrier can disable 5G on your account?

    ricky_andre_76
    ricky_andre_76
    New Member
    February 23, 2024

    you need to send modem AT commands, but every company has its own commands. There is little or no documentation at all on how to solve connection and speed issues. This is just an example from the internet regarding another brand ...

     

    Format:

    AT+QCFG="nwscanmode"[,<scanmode>[,<effect>]]

    Parameters：

    <scanmode> Number format, network search mode 0 AUTO 1 GSM only 2 UMTS only 3 LTE only  <effect> Number format, when to take effect 0 Take effect after UE reboots 1 Take effect immediately

    Examples:

    Set modem to LTE only:

    echo -e "AT+QCFG=\"nwscanmode\",3,1" > /dev/ttyUSB2

    Set it back to “auto”:

    echo -e "AT+QCFG=\"nwscanmode\",0,1" > /dev/ttyUSB2
      Terms & ConditionsAccessibility statement