Skip to main content
bfeole
bfeole
New Member
December 9, 2016
Question

firewall policy service prioritization

  • December 9, 2016
  • 1 reply
  • 4925 views

Hello,

 

I want to make 5060 and some other ports for sip prioritized over my other firewall policy rules. What's the best way to do this? Would I make a lan to wan rule, put it as the top policy and select the services? Would that affect both incoming and outgoing traffic? I assume it would only work for outgoing. But as it's for voip quality, I want it to be both ways. Currently I have it set to any interface to any interface but that doesn't seem secure, or organized as I just need it to be lan to wan and wan to lan.

 

If you are curious, the policies after it make it so that the rest of the traffic will be restricted to a lower priority and lower allowance of total bandwidth. So this top rule will make anything going through those ports not be affected by those restrictions, and therefore improve the quality of service.

 

Thanks,

Me

    1 reply

    tanr
    tanr
    New Member
    December 9, 2016

    You generally don't want any to any allow rules, or open ended wan to lan rules -- they're a security risk.

     

    If you have an outgoing security policy rule (lan to wan, service SIP, allow, plus security profiles) then once you've made the outgoing connection it will allow communication back for the services you allow, using your security profiles, for that session.

     

    It sounds like what you're really looking for is bandwidth shaping and service prioritization?

    http://cookbook.fortinet.com/traffic-shaping-for-voip/

    Also, traffic shaping with priority queuing by service.

    http://cookbook.fortinet.com/traffic-shaping-priq/ 

     

    Caveat:  I've only looked these over with plans to implement them for some very high bandwidth applications, but haven't tried them yet.  If you do, let us know how it goes!

    Terms & ConditionsAccessibility statement