Skip to main content
A
Anonymous_User
Contributor
May 15, 2006
Question

Firewall blocks network drives

  • May 15, 2006
  • 5 replies
  • 2972 views
Hi All, I' m having a problem with Forticlient 3.0.142. Basically, when a user VPNs in they are unable to access any network drive unless they set the firewall to Pass All. Once the firewall is disabled the network drives are accessible. If the firewall is then set back to Normal then network drives can still be accessed, until the machine is rebooted. This is not a 1 off, I believe that every laptop we have running version 3.0.142 on has this issue here. I have added our LAN into the trusted zone of the firewall but this has not resolved the problem. We did not experience this with version 2. Any ideas anyone? Thanks, Martin.

    5 replies

    vanc
    vanc
    New Member
    May 15, 2006
    Firewall will block all network share requests for public zone. So you need to add your network drive IP to the trusted zone.
    A
    Anonymous_UserAuthor
    Contributor
    May 17, 2006
    I added the subnet of our LAN into the trusted zone, the IP address of the server hosting the share is on that subnet so the server should be trusted. If I drop the firewall and Pass All I can then access the server and shares on it, if I then set the firewall to Normal I can also then access the server and the shares on it. When I reboot though and the firewall is set to normal I can' t access the server and it' s shares, until I then drop the firewall (set it to pass all) and then set it again to normal. Generally I' m not impressed with v 3.0.142 of Forticlient, we also have lots of users experiencing problems with VPN Error Connection messages even though the VPN does not drop, does anyone know when the next release is due??!
    A
    Anonymous_UserAuthor
    Contributor
    May 17, 2006
    Words of wisdom from Mr. Obvious, why wouldn' t you roll back to FC 2? There aren' t many new features on 3 from what I see. I' m assuming if it were that simple you wouldn' t ask. But, I figured I' d try.
    vanc
    vanc
    New Member
    May 17, 2006
    That should be a bug in FortiClient firewall. For the VPN warning dialog, it' s triggered by DPD (Dead Peer detection). You can unselect the option on the VPN connection page to disable the warning. (Keep IPSec service running forever)
    A
    Anonymous_UserAuthor
    Contributor
    May 23, 2006
    We have rolled back to version 2 as it doesn' t have the Firewall issue that I mentioned. I guess we' ll wait for the next release to see if the bug is fixed. Thanks Vanc for the info re: DPD, I' ll try what you suggested...
    Terms & ConditionsAccessibility statement