Skip to main content
Tommy_Rogers
Tommy_Rogers
New Member
February 26, 2015
Question

FGT40C and Firmware 5.2.0

  • February 26, 2015
  • 3 replies
  • 4676 views

The SYSLOG option has disappeared in the 40C. I am able to turn on the service by issuing the following commands,

 

config log syslogd setting

set status enable

set server <IP Address>  "This command is missing.."

 

Has it been moved to a different location?

Thanks

    3 replies

    ahmedcmc
    ahmedcmc
    New Member
    February 28, 2015

    Help please , I am waiting you ...

    ede_pfau
    SuperUser
    ede_pfau
    SuperUser
    February 28, 2015

    hi,

     

    I've just tried this:

    fw # conf log syslogd setting 
    fw (setting) # sh 

    fw (setting) # sh fu

    config log syslogd setting
        set status disable
    end
     

    fw (setting) # set stat ena 
    fw (setting) # sh fu

    config log syslogd setting
        set status enable
        set server ''
        set reliable disable
        set port 514
        set csv disable
        set facility local7
        set source-ip 0.0.0.0
    end
     
    fw (setting) # set server 192.168.234.11
    fw (setting) # sh

    config log syslogd setting
        set status enable
        set server "192.168.234.11"
    end

    fw (setting) # sh fu
    config log syslogd setting
        set status enable
        set server "192.168.234.11"
        set reliable disable
        set port 514
        set csv disable
        set facility local7
        set source-ip 0.0.0.0
    end


    fw (setting) # end
    fw #

     

    So everything is working as expected.

    BUT -

    I am running v5.2.2 ! Please upgrade.

    Tommy_Rogers
    Tommy_RogersAuthor
    New Member
    February 28, 2015

    I just upgraded the firmware to 5.2.2. I can see the extra commands after I do "set status enable".

     

    Thanks

     

     

    Terms & ConditionsAccessibility statement