Skip to main content
YtseJam
YtseJam
New Member
December 28, 2016
Question

FGT_40C Hardware Problem?

  • December 28, 2016
  • 1 reply
  • 9762 views

Hi guys,

 

I just wanna ask help how to reset my fortigate 40C. It boot failed when I console it, then when I tried to format the boot device and load a new firmware via tftp it doesn't work.. Anyone can diagnose what's the problem, is it already a hardware failure/problem? I attached boot logs as reference... Thank you in advance...

 

Regards,

JAM

    1 reply

    MikePruett
    MikePruett
    New Member
    December 28, 2016

    It looks like you need to format and load an image via TFTP.

     

    That being said, the 40C is ancient. Get you a newer device that isn't way beyond EOL and enjoy.

    YtseJam
    YtseJamAuthor
    New Member
    December 28, 2016

    Hi Mike,

     

    Thanks for the reply.

    anyway, I already load a new image via tftp (see attached screenshot error). Its my first time to see that error, I already load tons of fortigate image via tftp and it works fine.. 

     

    Yeah your right, 40C I think face out already.. but recently we renew a 2 years license. Is it possible to get a new device then use/transfer our current license?

    foo
    foo
    New Member
    December 28, 2016

    Hi,

     

    Did you perform a HQIP (Hardware Quick Inspection Package)-test? According to <http://wiki.diagnose.fortinet.com/index.php/Running_an_HQIP_(Hardware_Quick_Inspection_Package)_test> HQIP supports the FG-40C.

     

    Regards,

    Peter

    Terms & ConditionsAccessibility statement