Dear Team,
One of our customer is moving from FG300D firewall to 200F, however wants to know if we can re use the SFPs of 300D firewall in 200F firewall. based on Fortigate 200F data sheet, the SKU has changed from FG-TRAN-LX/SX/GC to FN-TRAN-LX/SX/GC.
Could you please confirm if FG-TRAN-LX/SX/GC can be reused on 200F ?
Hi
Thank you for updating your query.
FG- is an old SKU. Fortinet used to have separate transceivers for Fortigate (FG-) and Fortiswitch (FS-). Now SKU has FN-.
As per 200F and 300D datasheets both the transceiver is showing the same description and supported parameters.
200F Datasheet:-
1 GE SFP RJ45 transceiver module FN-TRAN-GC 1 GE SFP RJ45 transceiver module for all systems with SFP and SFP/SFP+slots.
1 GE SFP SX transceiver module FN-TRAN-SX 1 GE SFP SX transceiver module for all systems with SFP and SFP/SFP+ slots.
1 GE SFP LX transceiver module FN-TRAN-LX 1 GE SFP LX transceiver module for all systems with SFP and SFP/SFP+ slots
FN-TRAN-GC 1G Copper,
FN-TRAN-LX 1G;1310nm
FN-TRAN-SX 1G;850nm
300D Datasheet:-
1 GE SFP LX Transceiver Module FG-TRAN-LX 1 GE SFP LX transceiver module for all systems with SFP and SFP/SFP+ slots.
1 GE SFP RJ45 Transceiver Module FG-TRAN-GC 1 GE SFP RJ45 transceiver module for all systems with SFP and SFP/SFP+slots.
1 GE SFP SX Transceiver Module FG-TRAN-SX 1 GE SFP SX transceiver module for all systems with SFP and SFP/SFP+ slots.
FG-TRAN-LX 1G;1310nm
FG-TRAN-SX 1G;850nm
FG-TRAN-GC copper ethernet
Datasheet for the FGT available transceiver
https://www.fortinet.com/content/dam/fortinet/assets/data-sheets/Fortinet_Transceivers.pdf
Regards
Priyanka
- Have you found a solution? Then give your helper a "Kudos" and mark the solution
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.
