FG-61F with OS version 6.4.7 has anyone seen an increase in memory utilization where it eventually p
We have multiple FG-61F that are deployed and apparently there is a memory leak of some type that will cause your FG to constantly increase in memory until it either dies and has to be rebooted, or you reset something.
These are not really using IPS, but do use ADVPN IKE tunnels between the devices over point to point and metro-E circuits. The ones over the internet use ADVPN and all traffic is sent back through the core.
We noticed this with using FortiSIEM after was had some devices reboot themselves. We have a TAC case open, and have reached out the account manager. But after much back and forth I was basically told by TAC that the 61F is a low end junk and that it is not powerful enough to do what they are advertising.
One box as 2 people on the network and is at 65% today. Another has less than 50 people onsite and has gone up 1% a day until now it is at 79%. Probably half of the 30 or so installed have above 50% Memory usage. The data connections are mostly in the realm of 10Mb up to 100Mb for the PTP/MetroE and 100Mb to 700Mb for the Direct Internet.
I have a TAC case open and have complained to our current account manager. TAC says yep this is happening, but these are low end
But to be honest I would really like it if there was a way to go above our account managers head, as they do not seem engaged. We have 30 something FG and about half are seeing this memory going up.