FG 500 - Extreme Switch - bfd_read_ipv4: BFD packet processing failed.
Hello,
we have a problem with our OSPF connection to a location. This is a 250Mbit "Ethernet Connect" connection and a 10MBit backup. On one side is an FG 500 FW: 6.0.11 and on the other side is an Extreme Switch with two BFD ports. Unfortunately the connection swings around every now and then although there is no real connection failure. The ISP monitors this connection. It goes to the backup connection and then only comes back to the primary connection when I restart the Extreme Switch. Does somebody has any idea?
This is the error:
bfd_write:Session[**IP**->**IP**,i_ospf_2,1D6]: Sending BFD packet bfd_packet_process: Can't find session with discr 0x00000215 bfd_read_ipv4: BFD packet processing failed.
bfd_session_change_state: Session[**IP**->**IP**,49***,i_ospf_1,]: state DOWN -> INIT local_diag=0x00 bfd_session_send_packet_now: Session[**IP**->**IP**,49***,i_ospf_1]: bfd_session_send_packet_now
# get router info bfd neighbor
--> The line is Down then UP
Config:
Timer intervals configured, Hello 10.000, Dead 40, Wait 40, Retransmit 5 Hello due in 00:00:06
Thanks!