Skip to main content
franga
franga
New Member
December 5, 2024
Solved

FAZ 7.6.1 Add secondary disk on XenCenter

  • December 5, 2024
  • 1 reply
  • 497 views

Hello,
I recently performed a fresh installation of FortiAnalyzer and am encountering an issue when attempting to add a secondary hard drive. Despite following the documented procedures, I am unable to complete the operation.

Specifically:

  • When using the "execute lvm extend" command, the process does not yield any meaningful result.
  • The "execute lvm info" command returns the message "unavailable" on the disk 2

I have verified that the added hard drive is visible at the hardware level, but it seems that FortiAnalyzer does not recognize or properly manage it through LVM.

Could you please provide guidance on how to resolve this issue? Thank you for your support.

Best regards,

Best answer by franga

Hi,

I solved the problem. I turned off the machine, unplugged the disc and plugged it back in and now the disc is available. I then loaded the disk via CLI.

 

1 reply

franga
frangaAuthorAnswer
New Member
January 17, 2025

Hi,

I solved the problem. I turned off the machine, unplugged the disc and plugged it back in and now the disc is available. I then loaded the disk via CLI.

 

Terms & ConditionsAccessibility statement