Skip to main content
Claush_
Claush_
New Member
April 12, 2023
Solved

FAP directly connected to a FGT

  • April 12, 2023
  • 2 replies
  • 1552 views

Is it possible to connect a FortiAP directly to a port of a Fortigate where it has several vlans tagged?

 

I have a FortiAP that I have to connect directly to a 40F and I have several vlans for the different SSIDs.

 

For this type of architecture do I have to use a hardware switch or a software switch?

    Best answer by Claush_

    I tried it with 802.3ad and it didn't work, but I tested it with a software switch and it worked perfectly.

    2 replies

    victornakagomi
    victornakagomi
    Explorer II
    April 12, 2023

    Hi,

     

    In this case, you can use only an 802.3ad aggregation and use only 1 interface and put Vlan inside this aggregation, or put all Vlans on the connected interface.

    Create 1 Vlan for each SSID if you use a bridge mode.

     

     

     

    I hope this message helps you.

     

     

    Claush_
    Claush_AuthorAnswer
    New Member
    April 12, 2023

    I tried it with 802.3ad and it didn't work, but I tested it with a software switch and it worked perfectly.

      Terms & ConditionsAccessibility statement