F60D - Help - Internet Provider Private IP ( vlan ) - Public on another interface
Hello,
Internet Provider gave us , these informations "like" that :
Private IP on Vlan : 10.1.1.2
Gateway : 10.1.1.1
Public IP : 105.105.100.100
For now , I am able to get access to the router from outside when :
On WAN1, I created a VLAN int for the Private IP
Add a route : 0.0.0.0.0/0 > 10.1.1.1
On WAN1 , I have tried two thing , create a vlan int with Public IP or a loopback with the IP Public too
For the Policy for now , I let Any to Any > ACCEPT
I also able to create a VPN between this router and another forti on another site , this is only working when I select the interface with the Public IP
Another thing working, is the ping only when I'm using the command : exe ping-options source 105.105.100.100
before trying to ping 8.8.8.8 for example
I have for now , no computer connected on local network. I am doing my test only from the web interface or CLI of the router
What do I need to do to not have to specify the source ping-option and enable Internet access for all and from the Router Interface or CLI
Thans
Best regards
Julien
Add a route : 0.0.0.0.0/0 > 10.1.1.1
