Skip to main content
Kevinta
Kevinta
New Member
May 11, 2020
Solved

Enable DHCP Option 43 on Fortinet 30OD

  • May 11, 2020
  • 1 reply
  • 8664 views

Hello every one,

My cisco AP ( cisco 2802iS K9) can not assign form DHCP server ( user FOrtinet300d), i refer on Cisco comunity .need enable DHCP option 43 on DHCP server,

how to enable DHCP option 43 and input correct value on Fortinet DHCP ? 

thanks so much

 

Best answer by emnoc

That great but a simplified sites has opt43 generator it might be of help

 

https://shimi.net/services/opt43/

 

 

Ken Felix

1 reply

localhost
localhost
Visitor III
May 11, 2020

Looks like you copied your option 43 straight out of the manual.

In the example from the manual the primary WLC controller ist at 192.168.10.5 and secondary WLC controller at 192.168.10.20.

Which most likely is not the case in your setup?

 

This (network)guy explains it pretty well, how to get the hexstring for your setup:

 

https://networkguy.de/cisco-wlc-dhcp-option-43/

 

emnoc
emnocAnswer
New Member
May 11, 2020

That great but a simplified sites has opt43 generator it might be of help

 

https://shimi.net/services/opt43/

 

 

Ken Felix

Kevinta
KevintaAuthor
New Member
June 13, 2020

thank@  emnoc ,  Mr Localhost for support  , I  was susscess with your instruction 

Terms & ConditionsAccessibility statement