Dual Public IP to be used for VPN Connectivity along with WAN Load balancing

3 replies
3978 views

Hello Folks,

Good Day! I am working for SOHO company. Company having dual uplink with different service providers. Service provider have provided two different public IP Addresses.

Would like to configure WAN Link load balancing. Also, when one SP goes offline, Remote Access VPN users must be connected through on another public IP of other service provider. I know how to configure WAN link load balancing but don't know what needs to be done to configure redundant VPN. Please give your advise what should be done on Fort client and Fortigate 50E firewall to achieve this.

I am new here on Fortigate so, your help will be graciously appreciated.

Thank You!

Regards,

Mayur Rajyaguru

Markus

New Member

Hi Mayur Welcome to the Forum.

I haven't this in place, but I think this should answer your question http://help.fortinet.com/fos50hlp/52data/Content/FortiOS/fortigate-ipsecvpn-52/Redundant_VPN_Config/Redundant_Route_Based_Example.htm

Good luck

Regards,

Markus

MayurjrajyaguruAuthor

New Member

Hello Markus,

Thanks for replying. Examples shown here are only related to HA/DUAL Fortigate firewalls. I do have only single unit which has dual uplink to different service providers. Any help please?

Regards,

Mayur Rajyaguru

Markus

New Member

Hello Mayur Doesn't read carefully enought, I'm sorry.

Probably it seems this is not possible, but there are more Pros out there. Maybe there is a way to achive this. What i've found is only this https://forum.fortinet.com/tm.aspx?m=148173

Regards,

Markus

Sign up

Login with SSO

Login to the community

Login with SSO