download performance bad while running iperf

2 replies
954 views

Hi,

i'm experiencing something strange... Fortigate 1800F clustered running 6.4.12 (planned to be upgraded in October to 7.0.15)

I'll narrow it down to it's most simplistic form...

Two user vlans A and B

One server vlan C

When running iperf between user vlans and server vlan C i see a considerable downgrade in download performance from vlan A. Upload is perfect and saturates the 1 GBit interface.

I don't see this issue from vlan B. Both download and upload saturate the 1 GBit interface.

All vlans go into one single trunk which is aggregated. I ruled out switching.

Strangely i see the issue dissapear after working hours. Both upload and download saturate the 1 GBit interface from vlan A.

Did a wireshark today during business hours in vlan A while running iperf. Saw a lot of fast retransmissions, dup ack, tcp previous segment not captured, tcp out of order...

Reviewed the complete Fortigate vlan config. Did not see anything wrong... Or at least both vlans seem to be configured alike. Anyone experienced something similar and has some hints?

__PRESENT

FortiGate

ebilcari

Staff

Based on your description for this behavior, it seems like some other host from VLAN A (or else) is saturating the download link. It's not clear how the physical connection are in this setup but I suspect some link saturation is happening on the switch ports. Do you have a monitoring system in place to trace link utilization?

Emirjon

pnobelsAuthor

New Member

I also performed testing from a distribution switch with an uplink of 10 GBit. From there on it's all 10 GBit to the firewall (and actually aggregated 2 x 10 GBit). On our monitoring, there's merely 150 MBit/s trafic going over there... When i tested on another switch, i changed the port between vlan A and B. And from vlan B everything was fine. So i see no evidence the link is saturated.

Sign up

Login with SSO

Login to the community

Login with SSO