Skip to main content
Michael01
Michael01
New Member
November 16, 2020
Question

Disable ssl vpn

  • November 16, 2020
  • 1 reply
  • 19636 views

Hi Guys,

 

We are using FGT 101E  5.6.2 firmware version. I want to disable the ssl vpn setup and tried this command in cli "config vpn ssl settings set sslvpn-enable disable" however the command doesn't exist.

Thank you in advance.

 

Regards,

Michael

 

    1 reply

    Markus
    Markus
    New Member
    November 16, 2020

    Hi Michael Pls, try this... Totally disable the SSL-VPN service (both web-mode and tunnel-mode) by applying the following CLI commands:

    config vpn ssl settings unset source-interface end

     

    Note that firewall policies tied to SSL VPN will need to be unset first for the above sequence to execute successfully.

    As an example, when source-interface is "port1" and SSL VPN interface is "ssl.root", the following CLI commands would be needed to ensure "unset source-interface" executes successfully:

    config vpn ssl settings config authentication-rule purge (purge all authentication-rules) end

    config firewall policy delete [policy-id] (SSL VPN policy ID(s) that srcintf is "ssl.root" and dstintf is "port1") end Best,

    Markus

      Terms & ConditionsAccessibility statement