Skip to main content
safwa
safwa
Explorer II
August 19, 2020
Question

different speed test via two phones AP22E or 224E

  • August 19, 2020
  • 1 reply
  • 1944 views

Hello

 

we will test the throughput of an access point  222E  also 224E  in mesh mode  and we have two phones (Glaxay A10 and Hawuei)

 

the problem:

 

why if we are  in the same position to test the throughput ( speed test via phone ) ,

 

the two phones (  (Glaxay A10 and Hawuei)  give different speed test and different throughput  despite they are in the same place  .

 

PLease , i need from expert wirless explain me why the two phone in the same place give different speed test

 

(   Glaxay A10 give  high speed and the other phone hawei give  low speed  )  i the same position that a allows us to hesitate for our work !!!

 

thanks in advance 

    1 reply

    TheJaeene
    TheJaeene
    New Member
    August 23, 2020

    Hi Safwa,

     

    Check on which Band the clients are connected and try to add the MIMO and Rate columns in the Wifi-Client Monitor on the FGT. Rule of thumb: 5GHz usually provides better throughput, more spatial streams (ex. 3x3 MIMO) also.

    If you get approx 75MBit/s as a maximum you are most probably connected via 2,4 GHz.

     

    There will be HUGE differences between the client´s speed regarding the connecting Band and MIMO (and the resulting Rate, but please note that the Rate is just the physical connection speed)

    Terms & ConditionsAccessibility statement