Skip to main content
t_rex_joe
New Member
February 18, 2019
Question

DHCP and Fortigate 30E with UBNT UAP-AC-Pro-Gen2

  • February 18, 2019
  • 4 replies
  • 7398 views

All,

 

Recently purchased a Fortigate 30E to replace my old linux iptables

and linksys ap.

 

30E firmware: v6.0.4 build0231 (GA)

UBNT Firmware: 4.0.21.9965

 

When I enabled DHCP for lan on 30e, the wired side is fine.

The Access point is a UBNT UAP-AC-Pro-Gen2. None of the

AP clients are able to retrieve a IP from the 30E.

 

When I disable the DHCP on the 30E and enable it on the linksys,

the clients work as expected through the UBNT AP and the wired side.

 

I do show on the 30E clients are assigned IP addresses, however

they are not shown on the actual device via network information.

 

My Wifi Devices:

- Laptop in win10 pro

- Nexus 5X

- Samsung Galaxy Tab A

 

I did run a few traces, from the 30E, it receives the Discover and offers an

IP, however nothing is returned.

 

On the AP, the request is not seen from the 30E, however when I add the linksys

back into the network, I do see the request from the linksys via the AP.

 

 

 

 

Please Advise,

 

Joe

 

 

 

    4 replies

    t_rex_joe
    t_rex_joeAuthor
    New Member
    February 19, 2019

    Here's an update.

     

    Below is the output from a capture from the UNIFI AP.

     

    The packet is traversing the network correctly and out the AP.

     

    However, the client is not accepting the IP offered via the fortinet

    over Wifi, it is accepting the IP via the linksys.

     

    For fortinet,

    What is "option 224" and how can I disable this on the fortinet.?

    ###

    T224 Option 224, length 17: 70.71.84.51.48.69.53.54.49.56.48.55.51.50.49.55.0

    ###

    -------- FROM 30E FOR PC - NO WORK 15:45:12.703699 IP (tos 0x10, ttl 16, id 0, offset 0, flags [none], proto UDP (17), length 343)     10.1.1.1.67 > 255.255.255.255.68: BOOTP/DHCP, Reply, length 315, xid 0xa8293d48, secs 768, Flags [Broadcast]           Your-IP 10.1.1.50           Client-Ethernet-Address XX:XX:XX:XX:09:88           Vendor-rfc1048 Extensions             Magic Cookie 0x63825363             Subnet-Mask Option 1, length 4: 255.255.255.0             Time-Zone Option 2, length 4: -28800             Default-Gateway Option 3, length 4: 10.1.1.1             Domain-Name-Server Option 6, length 8: 10.1.1.10,1.1.1.1             Lease-Time Option 51, length 4: 604800             DHCP-Message Option 53, length 1: Offer             Server-ID Option 54, length 4: 10.1.1.1             RN Option 58, length 4: 302400             RB Option 59, length 4: 529200             T224 Option 224, length 17: 70.71.84.51.48.69.53.54.49.56.48.55.51.50.49.55.0 -------- EO FROM 30E FOR PC - NO WORK --------------------- PC WORKS - LINKSYS 15:58:18.305300 IP (tos 0x0, ttl 64, id 41953, offset 0, flags [none], proto UDP (17), length 349)     10.1.1.240.67 > 10.1.1.104.68: BOOTP/DHCP, Reply, length 321, xid 0xe149f657, Flags [none]           Your-IP 10.1.1.104           Server-IP 10.1.1.240           Client-Ethernet-Address XX:XX:XX:XX:09:88           Vendor-rfc1048 Extensions             Magic Cookie 0x63825363             Subnet-Mask Option 1, length 4: 255.255.255.0             Default-Gateway Option 3, length 4: 10.1.1.1             Domain-Name-Server Option 6, length 4: 8.8.4.4             BR Option 28, length 4: 10.1.1.255             Domain-Name Option 15, length 3: "lan"             Lease-Time Option 51, length 4: 43200             DHCP-Message Option 53, length 1: ACK             Server-ID Option 54, length 4: 10.1.1.240             RN Option 58, length 4: 21600             RB Option 59, length 4: 37800             FQDN Option 81, length 22: [SO] 255/255 "DESKTOP-XXXXX.lan" --------------------- EO PC WORKS - LINKSYS

     

    CivicGreg
    New Member
    May 1, 2019

    Hi Joe, we are having the same issue 100E and same Unifi APs as you are using. Did you ever get a solution to this issue?

    jhopkins
    New Member
    May 9, 2019

    Either of you find a fix for this issue? We have numerous sites experiencing the same.

    Thought Leadership Security Summit. Outpace New Threats with AI - enhanced defense. Tuesday, Septmeber 15, 8:30 AM - 2:30 PM PT. The Golf Club at Newcastle, WA.
    Virtual event | September 2026. SASE summit. The age of autonomous trust. Register here!