Country/Region Mismatch under managed APs since upgrading to 6.2.2.

Forum|Forum|6 years ago
November 4, 2019
1 reply
23244 views

Since upgrading to FortiOS 6.2.2 on 80D I get "Country/Region Mismatch" warning under managed FortiAP. I am trying to set everything to GB, to that end I have changed config wireless-controller setting to "set country GB", and I have changed the FortiAP profile to "set ap-country GB" - this is on the FAP321C UK profile, but I still get the mismatch warning. Am I missing anything else, do I need to set GB elsewhere in config? Extract from my config below:

config wireless-controller setting set country GB set darrp-optimize-schedules "default-darrp-optimize" end

config wireless-controller wtp-profile edit "FAP321C UK" config platform set type 321C end set handoff-sta-thresh 30 set ap-country GB config radio-1 set band 802.11n set frequency-handoff enable set ap-handoff enable set vap-all disable set vaps "dsfeswfre" "wfewfew" "wfewfewg" set channel "1" "6" "11" end config radio-2 set band 802.11ac set vap-all disable set vaps "dsfeswfre" "wfewfew" "wfewfewg" set channel "36" "40" "44" "48" end next end

6.0

Dave_Hall

New Member

Confirm that the AP profiles in question are actually being used and/or referenced to. During the firmware upgrade process, AP profiles may need to undergo a script conversion process that might result in a new profile name being tied to the AP(s) in question.

James_GAuthor

New Member

Yes the profile is linked to the ap, and I created a new profile to check if that helped.

Dave_Hall

New Member

If you have configs saved on the 80D, if possible do a diff compare between the last know good configuration vs the current one - see what has changed.

Also, certain page elements do not render well in al web browsers, so try making the changes in difference browsers.

Sign up

Login with SSO

Login to the community

Login with SSO