connect ADSL modem

Forum|Forum|7 years ago
June 4, 2019
1 reply
6964 views

Hello, I need to connect an ADSL modem to my fortigate 310B, I currently have 2 dedicated links and that's where my traffic comes out with a load balancing. But I need this ADSL to send some of my users through that link. Is this what I'm trying to do? Until now what I am, I connected the modem to a port of the fortigate, but it does not give an exit to internte, I suppose it is for lack of some rules or route? Thank you....

Best answer by ede_pfau

For internet access, you need to

- point the default route ('0.0.0.0/0') to the port the modem is connected. Or, if you want to keep the WAN on the load balanced ports, at least point a route to the remote network to that port.

- enable 'NAT' in the policy from LAN to this port, and 'destination address' to 'all'

brazz_FTNT

Staff

Hey,

This Forum is for FAZ (FortiAnalyzer) related question, do you have any FAZ ?

Thanks

ede_pfauAnswer

SuperUser

For internet access, you need to

- point the default route ('0.0.0.0/0') to the port the modem is connected. Or, if you want to keep the WAN on the load balanced ports, at least point a route to the remote network to that port.

- enable 'NAT' in the policy from LAN to this port, and 'destination address' to 'all'

Cruz2019Author

New Member

I want to keep the load balanced with the 2 wan (WAN1 and WAN 2), the modem I want to connect independently and only give access to the internet to a VLAN.
I already have a route 0.0.0.0 0.0.0.0 that goes out to the 2 WAN I have in the load balancing, but I can not access the internet in a VLAN that I am sending through the WAN 5 modem, and create a route and a policy but I can not go to internet.

Sign up

Login with SSO

Login to the community

Login with SSO

Scanning file for viruses.

This file cannot be downloaded