Skip to main content
amey
amey
New Member
August 30, 2018
Solved

Confiigure dual WAN with policy routing

  • August 30, 2018
  • 2 replies
  • 9969 views

Hello Team, We are using FGT50E model with firmware version: v5.4.4 Currently we have a single WAN with 100Mbps speed details: IP: xx.xx.xx.xx subnet: aa:aa:aa:aa gateway:bb:bb:bb:bb DNS: cc:cc:cc:cc/dd:dd:dd:dd Static Route has been configured for WAN1 as: AD:10 and priority:0

We will be getting a new WAN connection of 100Mbps: IP: yy:yy:yy:yy subnet: mm:mm:mm:mm gateway: nn:nn:nn:nn DNS: oo:oo:oo:oo/pp:pp:pp:pp I have a single LAN for my clients: 192.168.1.0/24 I want to configure it such a way that clients with IP address: 192.168.1.30-192.168.1.50 should use WAN1 as their outgoing interface and rest local IPs should use WAN2 as their outgoing interface. I would like to know what should be the static Routes configured and how to specify the DNS address as both WAN are having a different DNS servers.

    Best answer by LBM

    I think you should configure the same distance and priority for both links and specify the clients for wan1 and wan2 on the policies.

    2 replies

    SecurityPlus
    SecurityPlus
    Explorer III
    August 31, 2018

    I have not done this myself. Can I ask the reason to put traffic from one set of LAN IP addresses out Wan1 and the other LAN IP addresses out Wan2? Is it for security, load balancing, or for another reason?

     

     

    amey
    ameyAuthor
    New Member
    August 31, 2018

    I want few address to route through WAN1 and rest via WAN2, We want to use WAN1 data for high priority clients(local server and systems) and WAN2 for low priority clients(Mobile devices).

    LBM
    LBMAnswer
    New Member
    August 31, 2018

    I think you should configure the same distance and priority for both links and specify the clients for wan1 and wan2 on the policies.

    Asus
    Asus
    New Member
    November 9, 2018

    HI Amey

     

    If you have configured in WAN 1 & 2 in firewall properly you can use dynamic Nat option which is available in policy  by default you just need to enable it   

    or 

    Try it Policy based routing for those user to solve this issue 

     

    Regards 

    SriramPrakash

    Terms & ConditionsAccessibility statement