Skip to main content
EricO
EricO
New Member
September 17, 2025
Question

Configuring FVE to connect to an Intercom System via SIP

  • September 17, 2025
  • 4 replies
  • 366 views

Wanting to see if anyone has any configuration steps/notes connecting FVE to an Intercom System via SIP.  Specifically, a GALAXY Paging system.  I'm hoping to get more than just the manual of menu items ("to set up XYZ navigate to ABC" etc)  Possibly actual notes/screenshots, maybe from an actual deployment, that can be used as a reference/guideline.  (If I had access to such an existing deployment, I'd reference it, but alas, I do not.)

4 replies

Anthony_E
Staff
Anthony_E
Staff
September 22, 2025

Hello Erico,


Thank you for using the Community Forum. I will seek to get you an answer or help. We will reply to this thread with an update as soon as possible.


Thanks,

Best Regards
Anthony_E
Staff
Anthony_E
Staff
September 24, 2025

Hello,

We are still looking for someone to help you.

We will come back to you ASAP.


Thanks,

Best Regards
Anthony_E
Staff
Anthony_E
Staff
September 29, 2025

Hello,

 

May I invite you to open a ticket with our TAC?: https://support.fortinet.com/welcome/

 

Regards,

Best Regards
waqar53
waqar53
New Member
September 29, 2025

You will need to do it with FXO. You connect it to the avaya phone line input for a CO line. Set it up so when you go off hook, the FXO device automatically calls a sip number.

Terms & ConditionsAccessibility statement