Configure VIP for Application on FortiADC

Hello Duy2003, 

Thank you for using the Community Forum. I will seek to get you an answer or help. We will reply to this thread with an update as soon as possible. 

Thanks, 

Hello,

We are still looking for an answer to your question.

We will come back to you ASAP.

Thanks,

Hello Duy2003,

Can you tell me if the following steps fix the issue?

To configure content routing for ports 802 and 4432 using L7/TCP on FortiADC, follow these steps:

1. Create a Custom Application Profile:

- Navigate to the application profiles section in FortiADC.

- Create a new custom application profile with the type set to TCP.

- This profile will allow you to handle L7/TCP traffic without using standard HTTP or HTTPS profiles.

2. Configure Virtual Server:

- Set up a virtual server to listen on ports 802 and 4432.

- Assign the custom TCP application profile to this virtual server.

3. Set Up Content Routing:

- Define content routing policies based on your requirements.

- Since you are using L7/TCP, you may need to use other criteria for routing decisions, such as source IP or other TCP header information, as HTTP headers won't be available.

4. Assign Content Routing Policies:

Apply the content routing policies to the virtual server configured for ports 802 and 4432.

5. Test Configuration:

Ensure that the configuration is working as expected by testing the application traffic through the FortiADC. By following these steps, you can use L7/TCP for your application while still implementing content routing for the specified ports.

Hope this helps!