Skip to main content
Chivigone75
Chivigone75
New Member
August 8, 2024
Solved

Configure one rule to allow multiple vlans to comunicate to one

  • August 8, 2024
  • 3 replies
  • 1760 views

Hello Team

 

I created 6 VLANs on an interface, I want to configure a rule to communicate 5 VLANs to one, but I can't find how to do it. The single way is set one by one rule. Does anyone know how I can do this?

 

Regards

Best answer by hbac

Hi @Chivigone75,

 

You can also enable Multiple Interface Policies feature by following this article: https://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-allow-the-configuration-of-policies-with/ta-p/191941

 

Regards, 

3 replies

Toshi_Esumi
SuperUser
Toshi_Esumi
SuperUser
August 8, 2024

If those all 5 VLANs need to have exactly the same policies to the other VLAN, and to the internet, you can bind them into one "zone" to set policies from/to the zone.
https://docs.fortinet.com/document/fortigate/7.4.4/administration-guide/116821/zone

Keep it in mind that once those 5 VLAN interfaces are in one zone, you can't use those individual VLAN interfaces in any policies.

 

Toshi

hbac
Staff
hbacAnswer
Staff
August 9, 2024

Hi @Chivigone75,

 

You can also enable Multiple Interface Policies feature by following this article: https://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-allow-the-configuration-of-policies-with/ta-p/191941

 

Regards, 

    Chivigone75
    Chivigone75Author
    New Member
    August 9, 2024

    It´s GREAT !!!, Is working. Thanks a lot

     

    Regards

    ripleyfin
    ripleyfin
    New Member
    August 10, 2024

    Have you looked into which VLANs are configured on your switches Trunk ports uplinking to your core switches? They need to be tagged, all VLANs on your Trunk Uplinks or else your untagged ports won't work https://mobdro.bio/ .

    Terms & ConditionsAccessibility statement