New Member

Question

Complete newbie failed SSLVPN setup

Forum|Forum|9 years ago
November 11, 2016
1 reply
4874 views

Hi All,

I was wondering if I could get some help from experienced users on this forum.

I followed the instruction of this video (https:// www.youtube.com/watch?v=5TshymeoXdo) and was able to

- setup the the SSL VPN tunnel login credentials.

- login and obtain an IP address (but with not the gateway address)

_____________________________________________________________________

Ethernet adapter VMware Network Adapter VMnet1:

Connection-specific DNS Suffix . : Link-local IPv6 Address . . . . . : fe80::b81a:50d2:635c:e8d5%25 IPv4 Address. . . . . . . . . . . : 192.168.116.1 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . :

Wireless LAN adapter Wi-Fi:

Connection-specific DNS Suffix . : Link-local IPv6 Address . . . . . : fe80::40f7:114b:1e5f:3a96%22 IPv4 Address. . . . . . . . . . . : 192.168.1.133 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.1

Tunnel adapter isatap.{7C15F833-57EF-471C-A2FC-7492B036B5E3}:

Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . :

Tunnel adapter Local Area Connection* 14:

Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . :

Tunnel adapter isatap.{9BDBC2CC-3C82-4727-8E2F-E78FF2F46821}:

Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . :

Tunnel adapter isatap.{78AB2005-55EF-40DC-A9B1-8910CE72BC4D}:

Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . :

Tunnel adapter isatap.{CA6E7077-C830-4992-ACFE-028CA3BC9616}:

Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . :

_____________________________________________________________________

Another issue is that when I log on to my router, instead of showing the usual login screen (dashboard), it jumped automatically to the SSLVPN remote login screen.

regards,

Sam

Captured remote login screen.JPG

SuperUser

For the last question, refer to below:

https://forum.fortinet.com/tm.aspx?m=121204

This is the way to change admin access HTTPS port to avoid conflict with SSL VPN portal (HTTPS).

Alternatively you can change SSL VPN port to something else like 11443 under "config vpn ssl settings" to keep admin access to 443. You can find GUI way easily. Obviously your need to change the URL to access to "https://xxxxx:11443.