Skip to main content
A
Anonymous_User
Contributor
March 21, 2011
Question

command to check for listening ports

  • March 21, 2011
  • 7 replies
  • 22406 views
Hi All, what is the netstat -na equivalent command in fortios? Basically I just want to check what tcp/udp ports are listening.... Many thanks

    7 replies

    ejhardin
    ejhardin
    New Member
    March 21, 2011
    Not currently available.
    emnoc
    emnoc
    New Member
    March 23, 2011
    Download nmap or get the fortigate pdf sheet that shows all listening ports and services that are supported on that port. I don' t have a link, but Kb fortigate and active ports and you can find the document. So what are you trying to test or determine?
    ede_pfau
    SuperUser
    ede_pfau
    SuperUser
    March 23, 2011
    It' s called " Traffic Types and TCP/UDP Ports used by Fortinet Products" and found here: http://kb.fortinet.com/kb/microsites/search.do?cmd=displayKC&docType=kc&externalId=10773
    A
    Anonymous_UserAuthor
    Contributor
    March 23, 2011
    Hi all thanks for the replies I just wanted to ensure that udp port 6023 was in a listening state. pretty basic thing really. surprised you cant run a command to tell you so.
    ejhardin
    ejhardin
    New Member
    March 23, 2011
    surprised you cant run a command to tell you so.
    Agreed but nmap should do what you need.
    emnoc
    emnoc
    New Member
    March 23, 2011
    Hi all thanks for the replies I just wanted to ensure that udp port 6023 was in a listening state. pretty basic thing really. surprised you cant run a command to tell you so.
    fwiw I don' t think that port is a listener on a FGT series and should be used for forticlients and manager.
    A
    Anonymous_UserAuthor
    Contributor
    March 24, 2011
    you are correct it is only for the fortimanager
    Terms & ConditionsAccessibility statement