Skip to main content
Nandeesha104
Nandeesha104
New Member
June 26, 2024
Question

Client Url access issue via VPN

  • June 26, 2024
  • 3 replies
  • 1208 views

Hi All,

Issue: whenever we try accessing the URL connecting to the VPN through office network it WORKS. but at the same time if we try accessing the URL out-off the office network with VPN it does not work.

 

kindly share your suggestions and steps to fix it.

and can anyone share me the support team contact number or email ID so that we can connect at the point of incidents

3 replies

fricci_FTNT
Staff
fricci_FTNT
Staff
June 26, 2024

Hi @Nandeesha104 ,

 

My understanding is that you are trying to connect to a SSL VPN URL it works only if you are inside the office network. It does not work when you are outside the office, correct?

1- What is the URL and what is the IP address that is associated with it? (you can try to ping the URL and you should get an IP address)
2- Is the IP address reachable from outside the office network?

To contact our support you can find the contact below:

https://www.fortinet.com/support/contact

 

Best regards,

    hbac
    Staff
    hbac
    Staff
    June 26, 2024

    Hi @Nandeesha104,

     

    We need the source and destination IP addresses to run debug flow. Please refer to https://community.fortinet.com/t5/FortiGate/Troubleshooting-Tip-First-steps-to-troubleshoot-connectivity/ta-p/192560

     

    Regards, 

    datorresv
    datorresv
    New Member
    June 26, 2024

    Hello Nandeesha

     

    If there is a URL problem, it could be related to DNS resolution.

     

    1. In case the failure is the SSL VPN access URL, verify that the type A record published abroad exists.


    2. If the problem is an application that is reachable through VPN, check the resolution of the internal DNS and the internal DNS configured to be assigned to SSL VPN users.

     

    Greetings.
    Diego.

    Terms & ConditionsAccessibility statement