Skip to main content
ABCBakeryNT0053
ABCBakeryNT0053
New Member
July 8, 2016
Solved

Can we add more WAN interface on Firewall Fortinet 100D

  • July 8, 2016
  • 1 reply
  • 14879 views

Hi everyone,

Now my company is using Fortinet 100D with 2 static IP for 2 WAN port, now my boss wants to have another static IP. But the question is: firewall just have two ports WAN, can I configure to add 1 more WAN ports to make firewall have 3 WAN ports.

 

    Best answer by Nils

    If you'er running the internal interfaces as "interface Mode" you could use one of those.

    There's nothing special with the WAN1 and WAN2 interfaces, it's just interfaces.

     

    If you don't run "Interface Mode" on the internal switch, see if this is something you could activate.

     

    1 reply

    Nils
    NilsAnswer
    New Member
    July 8, 2016

    If you'er running the internal interfaces as "interface Mode" you could use one of those.

    There's nothing special with the WAN1 and WAN2 interfaces, it's just interfaces.

     

    If you don't run "Interface Mode" on the internal switch, see if this is something you could activate.

     

    ABCBakeryNT0053
    ABCBakeryNT0053Author
    New Member
    July 8, 2016

    Ok thanks. Can I ask a question more. Now the ISP give me 2 static IP with one physical line. Can Fortigate 100D be configured to have 2 static IP on only one physical line.

    Nils
    Nils
    New Member
    July 8, 2016

    Do you want these IP-addresses to reside on the same interface?

    Terms & ConditionsAccessibility statement